Select Language   

Product sort
Home > Induction Cooktop > Four Burner >


AFG-4ICT-001  
  Product Features:

The Crown Induction cooker AFG-4ICT-001 Induction hob with it's advanced induction heating system, micro-computerized control, low energy usage and multi-functions, is the optimum solution for a modern kitchen. The 'Control Induction' hob is designed with customer focus. Manufactured from high quality materials, the unit is safe and reliable, ergonomic and will enhance your cooking experience. Four cooking areas.

INDUCTION Cooktop 4 Burners

Working Principle
The two main components of the ‘Control Induction’ hob are the induction heating coils, and the control system. The electronic control system energizes the coils, causing them to generate powerful magnetic fields in the areas immediately above the coils. These fields travel through the vitro ceramic plate on which the pans are placed and eddy currents are formed in the ferromagnetic materials in the pans. The tremendous energy generated by the eddy currents heat the food directly by conducting the heat through the base of the pans and into the food. Good quality pans suited to the particular cooking processes being carried out are essential for obtaining good cooking results
Safety
This hob is designed for domestic use. With a view to constantly improving our products, we reserve the right to make any changes to their technical, programming or aesthetic features connected with their technical evolution.

  • Over- Temperature Protection 

Temperature sensors are fitted and can monitor the temperatures inside the hob. When an excessive temperature is monitored, the induction hob will stop operation automatically.

  • Detection of Small Articles

If a pot of less than 80 mm in diameter, small articles (knife, fork, scissors, keys , etc.) or non-magnetic pots (such as aluminum ) are sensed, the buzzers give out an alarm lasting about 30 seconds. If a suitable pan is not placed on the hob the cooker will switch off.

  • Heat Indication

When the hob is used for a long time, residual heat remains in the heating zone for a few minutes. The code “H” appears, warning the user to avoid touching the heating zone.

  • Auto shutdown protection

Auto shut down is a safety protection function for your induction cooker. It will shut down automatically if you forget to turn off your cooking. When a pot is removed, the induction hotplate will stop heating that zone immediately and shut it down after the buzzer sounds for 1 minute. Reminder: People with a heart pacemaker should only use this product under the guidance of the doctor.
Installation
Cut an aperture in the table surface in accordance with the sizes shown in the drawing. For the purpose of installation, and use, a minimum of 50 mm space shall be preserved around the hole. Be sure the thickness of the table surface is at least 30mm. Please select heat-resistant table material to avoid deformation caused by the heat radiation from the hotplate. As an alternative to the method below the hob can be flush mounted provided the adjacent surface is stainless steel or some other suitable heat proof material. See Figure (1)

Ensure that the induction hob is well ventilated and the air inlet and outlet is not blocked. Good ventilation is vital for a good service life of the induction cooker. As shown in Fig 2  Ensure the induction hob is in good working order..

Note: The safety distance between the hotplate and any cupboard above the hotplate should be at least 760mm.
Apply suitable sealant to secure the hob to the worktop and to prevent ingress of water.

Power line connection
The socket shall be connected according to the relevant national standard or connected to a single-pole cut-out. The method of connection is shown in Figure (3):
 


Induction cooktop appearance


Schematic diagram of the control panel

Power consumption

The above power may vary according to the material and the size of pan.
 Selection of cooking receptacles

You may have various receptacles suitable for induction heating.
This induction hob is able to identify multiple heating appliances, and you can test them by the following methods: Place the appliance in the heating zone. If the corresponding heating zone displays a power level, it shows the suitability of the pan; if “U” flashes, the pan is not suitable for induction cooking.
If the base of the pan is magnetic it should be suitable for induction cooking.

If the buzzer gives out an alarm, this indicates that the pan is not suitable for the induction hotplate; the hotplate will turn off after 1 minute.


BACK
This Week

Special Promotion
list price:$299
sale price:$149
EC/W
(Easy Clean)

list price:$849
sale price:$399
AFG-D/W
list price:$699
sale price:$499
Shower Panel
S092
list price:$799
sale price:$399
Bidet

»More